Canon MK 2500

Canon MK2500 prints precise characters of up to 300dpi for tubes, labels and offers smooth and easy printing from start to finish with a large LCD display and at low pricethat everyone can easily afford. 


Brochures
  •  

    The MK2500 prints precise characters of up to 300dpi for tubes, labels and more. With a large LCD display and automatic full and half-cutting, it offers smooth and easy printing from start to finish.

     
    • Character sizes: 2, 3, 6mm
    • Print speed (tubes): up to 240cm per minute
    • Standard output rate 42pcs./min.* 
      *20mm tube, 5 full-size characters, consecutive print mode, fast cutting

     

    Printing up to trailing edge of tube

     
     

    The MK series printers can print characters up to the edge of each tube to avoid tube waste. This contributes to long-term cost reduction.

     

    Automatic cutting / full-cut is also possible

     
     

    Each segment is partially cut automatically as it prints. The segments are easily separated manually after they come out of the printer. The cutting operation for each job can be set for full-cut, half-cut, no cut with marking, or no cut without marking.

     

    Consecutive / serial printing

     
     

    MK series printers can be set to print the same text on every segment (consecutive printing). Just enter the data and the number of segments required, then start the print. Or, MK series printer can be set to print numbers that increment automatically as the segments print (serial printing). No need to do separate entries and printing for each segment!

     

  • Printing Method Thermal transfer
    Resolution 300dpi
    Printing Speed Tubes: High speed: 40mm/sec.
    Middle speed: 25mm/sec.
    Low speed: 18.5mm/sec.
    Labels: High speed: 40mm/secs.
    Middle / Low speed: 25mm/secs.
    Output Rate High speed: About 42pcs./min.
    Middle speed: About 35pcs./min.
    Low speed: About 30pcs./min.
    Printing 20mm tubes, 5 full-size characters, consecutive print mode, half-cutting.
    Ink Ribbons (Exclusive cassette) Black: 100m
    White: 85m
    Black for Marking Strip: 40m
    Character Sizes 1.3mm (only full-width available), 2mm, 3mm, 6mm (full-width, half-width available for each)
    Input Modes Alphanumeric, symbol input
    Display LCD Graphic (160 x 64 dots)
    Display Capacity 10 characters/line x 2 lines (full-width) or 
    20 characters/line x 2 lines (half-width) (3 lines editing is possible.)
    Built-in Memory Print-data: Approx. 2,500 characters
    Files: Approx. 15,000 characters
    Service life of internal backup battery for data storage: About 5 years
    Media Cutting Method Automatic full-cutting, Automatic half-cutting
    Power Supply Exclusive AC Adapter
    Input voltage: AC 100V - 240V 50 / 60Hz
    PC Interface USB2.0 Full-Speed, Exclusive PC Connection Kit (Included)
    Operating Environment 15°C - 32.5°C (59°F - 90.5°F), 
    10% - 85% RH 
    Range is lowered to 5°C (41°F) with Tube Warmer option installed
    Storage Environment 5°C - 35°C (41°F - 95°F), 
    10% - 90% RH
    Dimensions (W x D x H) 250 x 300 x 85mm (9.8 x 11.8 x 3.4in.)
    Weight 2kg (4.4lb.) (printer only)
    Tube PVC tube, φ 2.5 - 6.5mm, 0.5mm thick 
    Tube attachment option is required (Other tubes should be tested for printing.)
    Label Tape (Exclusive cassettes (White, Yellow, Silver)) Width: 6mm, 9mm, 12mm
    Length: 30m (Silver: 27m) 
    Segment length can be set to 2mm through 150mm
    Wrap Around Tape: Exclusive cassettes Print area only: White
    Other areas: Transparent
    Take-up length: 8m
    Length: 33mm
    Width: 6 - 150mm (depends on cut setting)
    Marking Strip Specified thickness 0.5mm
    Plates of other thickness should be tested for printing
    Width: 8mm, 8.5mm, 9mm, 9.5mm, 10mm
    Plate Attachment option is required
    Exclusive ribbon cassette is required
    Manual cut only
    Heat Shrink Tube Shrink tube: φ 3.0 - 6.4mm
    Tube attachment option is required. 
    (Other tubes should be tested for printing.)
    4mm ID Strip (Exclusive Cassette (White, Yellow)) Width: 4mm
    Length: 5m
    Segment length can be set to 8mm through 150mm

     

  • No Comment